Volume Verification Ball
A measurement is only worth performing if it’s accurate. This is why you’ll want to have control of instrument calibration and the means of verifying that the instrument is measuring accurately by testing a ‘Known Volume Verification’ Ball.
The instrument will verify that the ball correlates with the measurement values as provided by the manufacturer so that you can continue your product testing feeling confident that your instrument performance has been checked.
The Universal Product Support*
As the Volscan Profiler provides the largest sample testing envelope in comparison to other laser volume measuring instruments, the scope of potential test samples extends much wider.
The choice and configuration of spikes and skewers for product support depend on the dimensions and texture (e.g. brittleness, softness), weight, centre of gravity and contact area with the base. The aim is to provide vertical stability without damaging the sample structure and thereby allowing an accurate measurement of its dimensions and volume to be recorded during the test.
The Universal Product Support is an optional accessory which extends the range of products which can be held within the instrument in order to be successfully tested. It provides a myriad of support solutions by presenting a 100mm diameter base with an array of pins of differing thicknesses and lengths.
The choice and arrangement of spikes and skewers depend on the dimensions and texture (e.g. brittleness, softness), weight, centre of gravity and contact area with the base. The aim is to provide vertical stability without damaging the sample structure and thereby allowing an accurate measurement of its dimensions and volume to be recorded during the test.
This Community Registered Design by Stable Micro Systems continues the expansion of product testing and analysis opportunities for the Volscan Profiler – a continuous development and improvement process which applies to all of Stable Micro Systems products.
*Community Registered Design
Sample Platform for Disposable Inserts
Disposable sample platforms provide the means to adhere samples to the platform and allow for quick removal and replacement between tests. They are located via a magnet and provided in batches of 50 which be reusable, according to the chosen adhesive.
For samples that are light and require more precision measurement of weight, a Precision Balance can be connected to your PC. This external Precision Balance has a 410g capacity and readability to 0.001g. It will automatically place the measured weight into the Volscan Profiler software and thereby ensure more accurate calculation of density and/or specific volume.